Gift Certificate

Chevrolet Impala 1971-1976 Vertical Lambo Doors

  • Model: VDCCHEVYCIMP7176
  • 5 Units in Stock
  • Manufactured by: Vertical Doors, Inc.
$1,095.00  $895.00
Save: 18% off
Qty :

The Item is a
Vertical Doors, Inc. Chevrolet Caprice 1971-1976 VERTICAL LAMBO DOORS CONVERSION KIT

Manufacturer: Vertical Doors, Inc.

Shipping: FREE SHIPPING LOWER 48 ONLY; Shipping to Hawaii, Alaska, Less traveled areas or any country outside of the US will have additional shipping charges applied. Contact us if you have any questions on shipping charges outside of the lower 48 states. Kits will be shipped 7-10 days after the payment has been received and it will take an additional 1-5 days in transit depending where the kit is being shipped to.

Bolt-on Vertical Lambo Door Conversion kits

Chevrolet Caprice 1971-1976 Lambo Door Conversion Kit by Vertical Doors Inc.

Part Number: VDCCHEVYCIMP7176 Includes:
2 Gas Shocks
2 Vertical Doors, Inc., Lambo Door Hinges (one for each side)
All Mounting Hardware
Direct "Bolt On" Hinge Kit
Mounts to Factory Bolt Pattern
Made in the USA from Domestic Hardened Steel
Patented in the USA
Completely Reversible

This kit will fit CHEVROLET CAPRICE ALL 1971, 1972, 1973, 1974, 1975, 1976

The only manufacturer of Vertical Lambo Doors and ZLR Door Conversion in the USA.

This is a vertical door kit for an Chevrolet Caprice 1971-1976 . Lambo Door Conversion Kit made specifically for your vehicle. VDI manufactures only the best, highest quality, strongest, and most affordable kit for the quality. Our line-up includes all of the major vehicle manufactures. Our system is everything you need for a successful, reliable and cost effective conversion in a minimum amount of time. Vertical Doors, Inc., kits are proudly made and patented in the United States. Bolt-on kits made specifically for your vehicle.

Is it hard to install Vertical Lambo Doors?

It is fairly easy as long as you are mechanically inclined and have basic tools.
Our bolt-on kits come with your vehicles factory bolt pattern for an easy install. A 6-12 page instructions manual is provided along with free tech support. Vertical Doors, Inc.,  prototypes every kit to be as easy as possible to install.

Basic Lambo Door Installation Instructions

1) Disconnect the battery.
2) Remove fender
3) Make sure to remove door catch if equipped.
4) Usually you will need more wire slack: Usually you will need to remove the door panel or kick plate. Do not cut your factory wires unless you have no other choice. 
Use 2 inch painters tape to mark the factory door location on the vertical and horizontal planes. Also measure the distance between the apron and front edge of the door by the top and bottom hinge.
5) Close the door and use 2" painters tape to secure the door to the body of the car.
6) Install new Lambo Door kit, make sure you have a flat surface if not you may need to modify your apron.
7) Make fine tuning adjustments and make sure all pivot points are greased. Installed the shock. 
Note: Do not install fender until the adjustment of the door is accurate. Also make sure everything is tight, adjustment is set and everything is Locktite.
8) Modify factory wire loom: In order to be able to open and raise the door, cut the factory wire boot in half and add wire loom to protect exposed wires. 
9) Cut the inner lip of your fender to make room for the new Lambo Door kit. Note: Cut only enough for the swing arm to move freely, after you have cut the fender use a sander or grinder and make sure the surface is completely smooth. Use touch up paint to protect the expose material and to give it a finish look. 
Close the door and reinstall the Fender.

In you have any questions please do not hesitate to give us a call.

Still need more help?

Contact us at 951.245.6669

Is it difficult to operate the doors after the Conversion?

Not only is our kit easy to install but is also easy to operate. Basically open your door like normal until it stops at a predetermined position then raise your door. Every kit comes with a shock that will take most of the door weight making it easy to raise the door up. Our kits give you the freedom to open your door as factory, unlike most imitators, Lambo Doors, Scissor Doors, Wing Doors, Butterfly Doors, Lamborghini Doors, etc.
So how do you operate Vertical Lambo Doors?
Step 1: Open the door until it stops at a predetermined position
Step 2: Raise the door up until it stops
That is it.... As easy as that! 

Your Chevrolet Caprice 1971-1976 will keep its factory look and feel while you are driving but the moment you stop and raise your doors you will experience a whole new level of attention that no other upgrade can give you.

How to Operate the Lambo Door Kit, Open the door until it stops, lift the door, is that easy.

Is this a safe Vertical Lambo Door hinge?

With over a decade in the market we have seen just about everything. The two main components of the Vertical Doors, Inc., hinge are made from 3/8 and 1/2 inch steel making them virtually bullet proof and able to withstand just about anything.
Below are two of our customers that sent us pictures after their vehicles were totaled. In both cases the Vertical Doors, Inc. hinges worked perfectly after the accidents.

Q. How strong are the Vertical Lambo Door Hinges?

A. They are very Strong. After rolling down the hill Sam quote was, "The only thing working was the Vertical Doors, Inc., Kit.

Lambo Door real life crash test

Adkins Rolled his Smart Car on the 91 FWY as you can see there was plenty of damage to the car, but not to the Vertical Doors, Inc. Convesion Kit.

Vertical Lambo Door real world crash test

One more of our customers, as you can see there is extensive damage around the fender and door area but the Vertical Doors, Inc. kit still works.

Vertical Doors, Inc. Lambo Door after car accident

When did Vertical Doors / Lambo Doors Conversions come into existence?

Ever since the 1960's people have been trying to come up with a new cool way to open the door of their car. Car manufacturer's and designers starting to come up with concept and production cars using different styles of car doors.
In the early 2000's Vertical Doors, Inc. introduced its Vertical Doors Conversion Kit. Vertical Doors, Inc. was the company that introduced the product to the market. Today Vertical Doors, Inc., is the most recognized name in our industry when it comes to Door Conversions.
You can see our products and/or copies in movies, magazines and virtually every car show.

This Vertical Doors, Inc., product is covered under one or more of the following U.S.A patents #7,941,897; #7,552,514; #6,808,223 #6,845,547; #7,140,075; #7,059,655 and other patents pending. USA PATENTS WILL BE AGGRESSIVELY ENFORCED!

Vertical Doors, Inc., Kits Also Known As: Lambo Doors Conversion Kits, Lambo Style Hinge Kits, LSD, VDC, VDI, VDC Kits, Upright Doors, Wing Doors, Butterfly Doors, Lamborghini Doors.

Are all the Chevrolet Caprice 1971-1976 Lambo Doors the same?

No, Vertical Doors, Inc. is the only USA manufacturer. We use domestic carbon steel and all our pivot and strike points are heat treated.
Most companies that have copied our designed use the cheapest way possible means to make their kits and since they can just shut down and restart under another name, they don't worry about quality of their products.


(Weld-on kits may damage your vehicle and they are NOT vehicle specific)

(If they say NO, the installation will be difficult and/or expensive)

Some sellers will mislead you and say "Weld-on" installation is easy and that there universal style kits is made for your particular vehicle.)

(Many times you will get "0" Support after the sale)



Do not take Door off during installation Please follow the detailed instruction manual step by step
Use 2" painters tape to mark the factory location of your door on the horizontal and vertical plane also measure the distance between the apron and the front edge of the door by the botton and top hinge.
Make sure the mounting surface is flat as possible, if anything is there, grind the surface so the vertical door kit can sit and mount flat.
Make sure both allen screw adjustment on each system are adjusted accordingly.
The kit requires no modification, the kit is a bolt on, but most inner fenders must be rolled or trimmed. Make sure to trim a tittle at a time, you only need to trim enough to allow the swing arm to open and move up and down
If you have any questions during the install PLEASE CALL US.

Shock Maintenance - IMPORTANT STEP - Do not skip this step!

This step is crucial in your installation process, if this step is not completed when installing your vertical door kit; all warranties are voided and may cause future problems with your vehicle.

Make sure you put grease on the body of the shoulder bold where arrow is pointing.
Make sure you use RED Loctite where the arrow is pointing, on the tread of the shoulder bolt.
Make sure you put grease on the bottom side of the shock end.
It is recommended that every 3 - 6 months all parts of hinge be sprayed with lubricant to ensure smooth hinge operation.
Lambo Door Shock Maintanance

Warning the use of any pliers, paint or foreign materials on shocks body or shaft will Void the Warranty.
Use No Pliers

Un set de bisagras estilo Vertical Lambo Doors para un Chevrolet Caprice 1971-1976 . Todo lo necessario para la conversion.

Numero de Parte: VDCCHEVYCIMP7176

2 amortiguadores de gas
2 bisagras de puertas verticales (una para cada lado)
Todos los herrajes de montaje
Bisagra de montaje Directo
Montajes a patron de perno de fabrica
Hecho en E.E.U.U. de acero endurecido domestico
Patentado en los E.E.U.U.
Completamente Reversible

Esta adaptacion de bisagras lambo le quedan a CHEVROLET CAPRICE ALL 1971, 1972, 1973, 1974, 1975, 1976

Vertical Doors, Inc. es el unico fabricante de bisagras de puertas verticales de estilo Lambo y la conversion de puertas ZLR en los Estados Unidos.

Este es un kit de puerta vertical para un Chevrolet Caprice 1971-1976 . Kit de conversion de bisagras de puertas lambo fabricado especificamente para su vehiculo. VDI fabrica solamente las mejor bisagras, de la mas alta calidad, las mas fuerte y las bisagras mas comodas para tu bolsion. Nuestra linea de bisagras incluye todos los grandes fabricantes de vehiculos. Nuestro sistema incluye todo que lo necesario para una conversion exitosa, confiable y rentable en un minimo de tiempo. Kits de vertical Doors, Inc., estan fabricados con orgullo y patentados en los Estados Unidos. Las bisagras son atornilladas a los Perno de fabrica hechos especificamente para su vehiculo.

Es dificil instalar las puertas verticales de Lambo?
Es bastante facil mientras usted este mecanicamente inclinado y tenga herramientas basicas. Nuestras bisagras seran atornilladas a los hoyos originales de su carro para hacer la instalacion facil. Incluimos un manual de instrucciones de 6-12 paginas. Vertical Doors, Inc. tiene soporte tecnico gratuito con la compra. Cada Prototipo es hecho para ser lo mas facil de instalar posible.

Todavia necesita mas ayuda?

Nos puede llamar al 951.245.6669

Es dificil operar las puertas despues de la conversion de bisagras lambo?

No Solo es nuestro kit facil de instalar, pero tambien es facil de operar. Basicamente, abrir la puerta normalmente hasta que se detenga en una posicion predeterminada y levante su puerta. Cada kit viene con un choque que se llevara la mayor parte del peso de la puerta haciendola facil de levantar. Nuestros equipos le brindan la libertad para abrir su puerta de forma de fabrica, a diferencia de la mayoria de imitadores, puertas Lambo, puertas de tijera, puertas batientes, puertas de mariposa, puertas de Lamborghini, etc.

Su Chevrolet Caprice 1971-1976 mantendra su aspecto de fabrica por dentro y por fuera, pero cuando usted lo conduzca y se detenga al abrir la puerta experimentara un nivel de atencion inigualable que no experimentara con ninguna otra modificacion.
Tenemos unos videos que te daran una buena idea de como funciona la conversion de la puerta de Lambo de Bolt-on. Mandenos mensaje y le podemos mandar el link de los videos.

Esto es una bisagra de puerta Vertical de Lambo segura?

Con mas de una decada en el mercado hemos visto casi todo. Los dos principales componentes de la bisagra Vertical Doors, Inc., estan hechos de 3/8 y 1/2 pulgadas de acero lo que los hace practicamente a prueba de bala y capaces de soportar cualquier cosa.

A continuacion se presentan tres de nuestros clientes que nos enviaron fotos despues de que sus vehiculos fueran chocados. En estos casos las bisagras Vertical Doors, Inc. funciono a la perfeccion despues de los accidentes.

P. Que tan fuertes son las bisagras de puerta Vertical de Lambo?

R. son muy fuertes. Despues de bolcarme por la colina Sam citar era, "la unica cosa que trabajaba era el Kit de puertas verticales.

Lambo Door real life crash test

Adkins rodo su coche Smart Car en el Freeway 91 como pueden ver que habia mucho dano al coche, pero no el Kit de Convesion de Vertical Doors, Inc.

Vertical Lambo Door real world crash test

Uno mas de nuestros clientes, como se puede ver hay grandes danos en el guardabarros y area de la puerta pero el kit de puertas verticales, Inc. aun funciona.
Vertical Doors, Inc. Lambo Door after car accident

Cuando vinieron en existencia las bisagras estilo lambo?

La gente ha estado tratando de llegar a una nueva manera fresca para abrir la puerta de su coche desde los 1960. Fabricante de automoviles y disenadores comienzan a subir con coches de concepto y produccion usando diferentes estilos de puertas de coche.

A principios de los 2000 Vertical Doors, Inc. introdujo su Kit de conversion de puertas verticales. Vertical Doors, Inc. fue la compania que introdujo el producto al mercado. Hoy Vertical Doors, Inc., es el nombre mas reconocido en la industria cuando se trata de conversiones de la puerta.

Puedes ver nuestros productos o copias en peliculas, revistas y virtualmente en todas las exhibiciones de autos.

Las bisagras de Vertical Doors, Inc. estan amparadas por una o mas de los siguientes patentes U.S.A. #7941897; #7552514; #6808223 #6845547; #7140075; #7059655 y otras patentes pendientes. PATENTES SERAN FIRMEMENTE IMPUESTAS

Las bisagras de Vertical Doors, Inc., estilo Vertical Lambo Doors tambien han sido llamadas:
Lambo Doors Conversion Kits
Lambo Style Hinge Kits
LSD Kits
VDC Kits
VDI Kits
VDC Kits
Upright Doors
Wing Doors
Butterfly Doors
Lamborghini Doors
puertas Gaviota
Conversion de las puertas a puertas verticales
Puertas de carros hacia arriba
Bisagra Para Puertas De Carro Que Abra Hacia Arriba
Automoviles con disenos de puertas inusuales
puertas de ala de mariposa
Puertas de coche verticales tipo Lambo
puertas de cuchillo

Todas las bisagras para el Chevrolet Caprice 1971-1976 Son Iguales o no?

No, Vertical Doors, Inc. es el unico fabricante de Estados Unidos. Utilizamos el acero de carbon domestico y el pivote y puntos de huelga de tratamiento termico.
La mayoria de las empresas que han copiado nuestro diseno buscan la forma mas barata posible de hacer sus kits y como son pequenas companias puede cerrar y abrir bajo otro nombre nombre, no les preocupa la calidad de sus productos.

Tenga cuidado antes de comprar:

Soldar bisagras a su carro puede danar su vehiculo.
Si el kit no es atornillado a los oyos originles la instalacion sera dificil o/y mas costosa.
Tenga cuidado con las empresas que venden el supuesto perno-en kits que realmente no tienen el patron correcto o peor aun te mandan una plantilla de papel para que tengas que perforar los agujeros a tu mismo.
Asegurese de que usted puede hablar con el vendedor.

PAYMENTS: PayPal Preferred.
 All major Credit Cards accepted (Visa, MasterCard, American Express, and Discover.)
  We do ship internationally but payment will be only be accepted via Wire Transfer (Bank to Bank) or PayPal with verified billing and shipping address.

SHIPPING: Orders are typically shipped to destinations within (5-10) business day after receipt of payment. PLEASE ALLOW 1-5 DAYS FOR TRANSIT TIME. Your order is custom packed for its protection. Shipping insurance is included in our quote. For faster delivery or shipment to Hawaii, Alaska, or Canada, please requests an updated quote prior to remitting payment. We provide products directly from manufactures and in the rare case an item is on backorder our purchasing power enables us to be first in line. You will promptly be notified if an item is in back order and given an e.t.a. for arrival. UPS tracking information will be emailed to you when it becomes available. Note: UPS cannot deliver to PO boxes. Be sure to specify a delivery address and Telephone number. Canadian buyers may incur an additional brokerage fee. Orders are not shipped on weekends or holidays.

RETURNS: Returns are for Store Credit only.
All E-Bay sales are final unless otherwise posted. Defective merchandise must be reported to us with-in 48 Hrs. of receiving the item. Failure to report any defective or damaged merchandise will result in the loss of your shipping insurance coverage and will be unable to be returned.
If your item is damaged in shipping you must contact us with-in 48 Hrs of receipt and contact UPS/FedEx/DHL or the Appropriate Shipping company to file a claim. UPS/FedEx/DHL or the Appropriate Shipping Company will not allow us to file a claim without being able to pick up and inspect the item, make sure that the item and packaging can be picked up by UPS/FedEx/DHL or the Appropriate Shipping for evaluation.
If you are missing any components from your package, you need to contact us within 72Hrs. All of our products are cover by manufacturer's warranty, unless the item is used or are being liquidated.

A request or a return must be submitted and approved before shipment and clearly displayed upon outside of package. A "Return Authorization Number" can be requested contacting us via eBay. Request must include part number, invoice number, and description of concerns. The issuance of an RA Number does NOT guarantee credit will be issued. All returns must be shipped Pre-Paid Freight, freight collect shipments will be refused. Any return without proper RA number displayed on packaging will be refused at shipper's expense. NON-Defective returns are subject to a 25% restocking fee. Requested within 7 days of receipt.

We do not guarantee proper fit of product if vehicle has been modified. Please forward your vehicle description (Year, Make, & Model) prior to closing order.